

ISO 10842-2017 航空器--地面工作連接--位置及類型 Aircraft -- Ground service connections -- Locations and types
- 標準類別:
- 標準大?。?/li>
- 標準編號:ISO 10842-2017
- 標準狀態:現行
- 更新時間:2023-12-18
- 下載次數:次
This document specifies the locations and types of aircraft ground service connections in order to optimize ground services both fixed and mobile, for the seven different services hereafter:
— 400 Hz electrical power;
— preconditioned air for cabin conditioning;
— pneumatic power for jet engine start;
— potable water;
— lavatory service (draining, flushing);
— aircraft refuelling;
— interphone (headset) connections.
It focuses on these aircraft services because:
— these connections are those most frequently used during aircraft airport turnaround operations;
— in terms of economic benefit, they have the greatest impact through improved efficiency.
This document is intended to apply to any new type of main line commercial transport category aircraft designed or built after its publication.
In addition, it is expected that any substantially modified new derivative aircraft type in the same category (derived from a previously existing type) will, insofar as technically and economically practical, meet the requirements of this document, if specified in the aircraft type specification established between customer airline(s) and manufacturer.
It is not the intent of this document to restrict in any way the basic design of any future types of civil passenger transport aircraft. It aims, however, at clarifying for aircraft design engineers the design characteristics which would make it difficult or impossible for a new type of aircraft to be adequately serviced from existing airport facilities. Should basic aircraft design requirements impose on a future model certain characteristics not complying with the present document:
— either alternative methods of servicing the aircraft will have to be implemented; or
— existing facilities in the airports where such a new type of aircraft is to operate will require some degree of modification/rework; or
— additional interface devices/equipment will be required in order to service such a new type of aircraft;
in either case resulting in increased aircraft servicing constraints and operating cost.nd edition
2017-07
Aircraft — Ground service connections
— Locations and types
Aéronefs — Prises de service au sol — Emplacements et types
Reference number
ISO 10842:2017(E)
?
ISO 2017
ISO 10842:2017(E)
COPYRIGHT PROTECTED DOCUMENT
? ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be r
-
GB/T 706-2016熱軋型鋼 2023-12-18
-
GB/T 1094.1-2013電力變壓器 第1部分:總則 2023-12-18
-
JB/T 10216-2013電控配電用電纜橋架 2023-12-18
-
GB 9706.1-2020醫用電氣設備 第1部分:基本安全和基本性能的通用要求 2023-12-18
-
GB/T 13663.2-2018給水用聚乙烯(PE)管道系統 第2部分:管材 2023-12-18
-
GB/T 10801.2-2018絕熱用擠塑聚苯乙烯泡沫塑料(XPS) 2023-12-18
-
GB 51251-2017建筑防煙排煙系統技術標準 2023-12-18
-
YB/T 4001.1-2019鋼格柵板及配套件 第1部分:鋼格柵板 2023-12-18