IEC 60412-2014 核檢測儀--閃爍體和閃爍探測器的命名(標識)以及閃爍體的標準尺寸 Nuclear instrumentation - Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions of scintillators

This International Standard gives guidelines for scintillation detectors and scintillators
nomenclature (identification) and standard dimensions of scintillators.
This International Standard is applicable to all types of solid organic and inorganic scintillators
used in detectors for scintillation counting and spectrometry.
The object of this standard is to define a standardized nomenclature for scintillation detectors
in which most of the properties can be found.
The object of this standard is to standardize the dimensions of bare scintillators in order to
facilitate interchangeability of non-encapsulated scintillators and to facilitate intercomparisons
of measurements with encapsulated scintillators.
Liquid scintillators are not addressed by this standard.
NOTE The identification labels laid down in Clause 2 of the present standard include certain dimensions which
may be expressed in millimetres or inches. The SI system recommends the use of millimetres rather than inches.dition 3.0 2014-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Nuclear instrumentation – Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions of scintillators Instrumentation nucléaire – Nomenclature (identification) des scintillateurs et des détecteurs à scintillation et dimensions normalisées des scintillateurs IEC 60412:2014-09(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright ？