

ASTM D4068-2015 隱藏水封膜用氯化聚乙烯薄板的規格 Standard Specification For Chlorinated Polyethylene (Cpe) Sheeting For Concealed Water-Containment Membrane
- 標準類(lèi)別:
- 標準大?。?/li>
- 標準編號:ASTM D4068-2015
- 標準狀態(tài):現行
- 更新時(shí)間:2023-08-01
- 下載次數:次
1.1 This specification covers flexible chlorinated polyethylene (CPE) sheeting which is used without mastic, bedding, or coating for construction of concealed water-containment membranes in applications where there is potential for costly secondary damage from leakage, and where very long-term reliable performance is essential. Examples are fountains, pools, planters, shower and safe pans, tile tubs, and similar installations where the membrane is inaccessible once construction is complete. Included are requirements for composition, strength and toughness, test methods, workmanship criteria, and methods of marking. 1.2 Manufacturers have the option to use recycled materials in this product. Recycled materials must be in accordance with the requirements in Section 4. 1.3 The test methods used to characterize the sheeting are intended to ensure quality and performance and are not necessarily adequate for design purposes. Test methods have been selected to be conducted primarily with liquids that simulate the environments to which the membrane will be subjected during actual installation and use. 1.4 This specification does not cover water-containment membranes exposed in use to ultraviolet light or direct sunlight. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 1: There is no known ISO equivalent to this standard. 1.6 The following safety hazards caveat pertains only to the test method portion, Section 14, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
-
GB/T 1094.1-2013電力變壓器 第1部分:總則 2023-08-01
-
GB/T 706-2016熱軋型鋼 2023-08-01
-
GB 9706.1-2020醫用電氣設備 第1部分:基本安全和基本性能的通用要求 2023-08-01
-
JB/T 10216-2013電控配電用電纜橋架 2023-08-01
-
GB/T 10801.2-2018絕熱用擠塑聚苯乙烯泡沫塑料(XPS) 2023-08-01
-
GB 51251-2017建筑防煙排煙系統技術(shù)標準 2023-08-01
-
GB/T 13663.2-2018給水用聚乙烯(PE)管道系統 第2部分:管材 2023-08-01