

ASTM C652-2015 空心磚(粘土或頁巖制空心砌磚)規格 Standard Specification For Hollow Brick (Hollow Masonry Units Made From Clay Or Shale)
- 標準類別:
- 標準大?。?/li>
- 標準編號:ASTM C652-2015
- 標準狀態:現行
- 更新時間:2023-05-18
- 下載次數:次
1.1 This specification covers hollow building brick and hollow facing brick made from clay, shale, fire clay, or mixtures thereof, and fired to incipient fusion. Four types of hollow brick in each of two grades and two classes are covered. In this specification, the term hollow brick shall be understood to mean hollow clay masonry units whose net cross-sectional area (solid area) in any plane parallel to the surface, containing the cores, cells, or deep frogs, is less than 75 % of its gross cross-sectional area measured in the same plane (see 4.3). This specification does not cover brick intended for use as paving brick (see Specification C902). 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 6) of this standard is beyond the scope of this specification. 1.3 Brick covered by this specification are ceramic products manufactured primarily from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment shall develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. Additives or recycled materials are permitted to be included at the option of the manufacturer. (See “firing” and “firing bond” in Terminology C1232.) 1.3.1 This specification and its individual requirements shall not be used to qualify or corroborate the performance of a masonry unit made from other materials, or made with other forming methods, or other means of binding the materials. 1.4 Hollow brick differ from unglazed structural clay tile (Specifications C34 and C212) and solid brick (Specifications C62 and C216). Hollow brick require greater shell and web thicknesses and hig
-
GB/T 1094.1-2013電力變壓器 第1部分:總則 2023-05-18
-
GB/T 706-2016熱軋型鋼 2023-05-18
-
GB 9706.1-2020醫用電氣設備 第1部分:基本安全和基本性能的通用要求 2023-05-18
-
JB/T 10216-2013電控配電用電纜橋架 2023-05-18
-
GB 51251-2017建筑防煙排煙系統技術標準 2023-05-18
-
GB/T 10801.2-2018絕熱用擠塑聚苯乙烯泡沫塑料(XPS) 2023-05-18
-
JTG D20-2017公路路線設計規范 2023-05-18