

ASTM D5456-2017 結構復合木材產品評定規格 Standard Specification for Evaluation of Structural Composite Lumber Products
- 標準類別:
- 標準大?。?/li>
- 標準編號:ASTM D5456-2017
- 標準狀態:現行
- 更新時間:2023-05-18
- 下載次數:次
1.1 This specification recognizes the complexity of structural glued products. Consequently, this specification covers both specific procedures and statements of intent that sampling and analysis must relate to the specific product. 1.2 This specification was developed in the light of currently manufactured products as defined in 3.2. Materials that do not conform to the definitions are beyond the scope of this specification. A brief discussion is found in Appendix X2. 1.3 Details of manufacturing procedures are beyond the scope of this specification. Note 1: There is some potential for manufacturing variables to affect the properties of members that are loaded for sustained periods of time. Users of this specification are advised to consider the commentary on this topic in Appendix X2. 1.4 This specification primarily considers end use in dry service conditions, such as with most protected framing members, where the average equilibrium moisture content for solid-sawn lumber is less than 16 %. The conditioning environment of 6.3 is considered representative of such uses. 1.5 The performance of structural composite lumber is affected by wood species, wood element size and shape, and adhesive and production parameters. Therefore, products produced by each individual manufacturer shall be evaluated to determine their product properties, regardless of the similarity in characteristics to products produced by other manufacturers. Where a manufacturer produces product in more than one facility, each production facility shall be evaluated independently. For additional production facilities, any revisions to the full qualification program in accordance with this specification shall be approved by the independent qualifying agency. 1.6 This specification is intended to provide manufacturers, regulatory agencies, and end users with a means to evaluate a composite lumber product intended for use as a structural mater
-
GB/T 1094.1-2013電力變壓器 第1部分:總則 2023-05-18
-
GB/T 706-2016熱軋型鋼 2023-05-18
-
GB 9706.1-2020醫用電氣設備 第1部分:基本安全和基本性能的通用要求 2023-05-18
-
JB/T 10216-2013電控配電用電纜橋架 2023-05-18
-
GB 51251-2017建筑防煙排煙系統技術標準 2023-05-18
-
GB/T 10801.2-2018絕熱用擠塑聚苯乙烯泡沫塑料(XPS) 2023-05-18
-
JTG D20-2017公路路線設計規范 2023-05-18