

IEC 60533-2015 船舶電氣和電子設施(EMC)--電磁兼容性 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
- 標準類別:
- 標準大?。?/li>
- 標準編號:IEC 60533-2015
- 標準狀態:現行
- 更新時間:2023-05-13
- 下載次數:次
This International Standard specifies minimum requirements for emission, immunity and
performance criteria regarding electromagnetic compatibility (EMC) of electrical and electronic
equipment for ships with metallic hull. Additional or divergent requirements for ships with non-
metallic hull will be given in a future International Standard (IEC 62742).
This International Standard assists in meeting the relevant EMC requirements as stated in
SOLAS 74, Chapter IV, Regulation 6 and Chapter V, Regulation 17. Reference to this
International Standard is made in IMO Resolution A.813(19).
The normative part of this International Standard has been prepared as a product family EMC
standard.
This International Standard further gives guidelines and recommendations on the measures to
achieve EMC in the electrical and electronic installations of the following equipment groups:
a) group A: maritime navigation and radio communication equipment and systems;
b) group B: power generation and conversion equipment;
c) group C: equipment operating with pulsed power;
d) group D: switchgear and controlgear;
e) group E: intercommunication and signal processing equipment and control systems;
f) group F: non-electrical items and equipment;
g) group G: integrated systems.
The basic EMC standard for groups A and C is IEC 60945. The EMC requirements according to
IEC 60945 apply additionally for
• bridge mounted equipment;
• equipment in close proximity to receiving antennas;
• equipment capable of interfering with the safe navigation of the ship and with radio
communication.
Effects on humans, like exposure to electromagnetic fields, and basic safety requirements
such as protection against electric shock and dielectric strength tests for equipment are not
within the scope of this International Standard.dition 3.0 2015-08
INTERNATIONAL
STANDARD
Electrical and electronic installations in ships – Electromagnetic compatibility
(EMC) – Ships with a metallic hull
IEC 60533:2015-08(en)
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright ? 2015 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, elec
-
GB/T 1094.1-2013電力變壓器 第1部分:總則 2023-05-13
-
GB/T 706-2016熱軋型鋼 2023-05-13
-
GB 9706.1-2020醫用電氣設備 第1部分:基本安全和基本性能的通用要求 2023-05-13
-
JB/T 10216-2013電控配電用電纜橋架 2023-05-13
-
GB 51251-2017建筑防煙排煙系統技術標準 2023-05-13
-
GB/T 10801.2-2018絕熱用擠塑聚苯乙烯泡沫塑料(XPS) 2023-05-13
-
JTG D20-2017公路路線設計規范 2023-05-13